Clean Room I High Power Lamps I Tubes & Battens I Highbays I Street Lights I Flood Lights
Clean room Lighting : providing safer environment
To prevent the ingress of any foreign particle in the subject area
To prevent the exodus of any particle from the area into the external environment.
To provide special protection for areas where high degree of hygiene and sterility is required to be maintained.
Recessed Panel 2x2 Bottom Opening
Wattages : 24/36/45/60 Watts
Aavailable in all CCT
For Cleanroom applications
Recessed Panel 2x2 Top opening
Wattages : 24/36/45/60 Watts
Aavailable in all CCT
For Cleanroom applications
Retrofit Bay Lamps : for instant saving without modifications
• Retrofit – No need to change the fixture • Easy adoption – only direct lamp replacement required • Sustainability – low energy consumption • Enhance comfort, safety and productivity High energy efficiency Directional light and no gear loss HID/CFLi lamp replacement solution Surge Protection > 2.5 KV
LED Lamp 27W/3000 Lm
Polycarbonate Body, Available in B22/E27 Caps,
IP 20 , PF>0.9 , THD < 20%, CCT : 6500K , CRI 80 , Lifetime 15K Hrs
LED Lamp 37W/4000 Lm
Polycarbonate Body, Available in B22/E27 Caps,
IP 20 , PF>0.9 , THD < 20%, CCT : 6500K , CRI 80 , Lifetime 15K Hrs
LED Lamp 47W/5000 Lm
Polycarbonate Body, Available in B22/E27 Caps,
IP 20 , PF>0.9 , THD < 20%, CCT : 6500K , CRI 80 , Lifetime 15K Hrs
LED Lamp 67W/8500 Lm
Polycarbonate Body, Available in B22/E27 Caps,
IP 20 , PF>0.95 , THD < 15%, CCT : 6500K , CRI 80 , Lifetime 20K Hrs
Optional Accessories available for new installations
Highbay Lamp Reflector
Optional Accessories available for new installations
Retrofit Tubelights : instant energy reduction
LED Sensor Tube
FEATURED PRODUCT
Sensor Technology • Unique Micro-Wave based Sensor Chip. • Operational under temperature variations.
Maintain high performance • Reliable operation between -20 to 45 OC ambient temperature • Trustable claimed lifetime 50,000 switching cycles
Safety • Protection circuit inside ensuring people’s safety in case of mis-use, complying with IEC safety requirements • Pass 4KV high-pot test, insulation & safety guaranteed • Pass 1KV surge test (vs. IEC standard 500V), avoiding the damage caused by input voltage fluctuation and lightning strike • 100% comply with IEC requirement on T8 dimension, tting into uorescent luminaire perfectly
Ultra bright polycarbonate LED retrofit tube light with high efficacy, suitable for replacement of existing T8 & T12 fluorescent tube light with G13 lamp holder.
T8 Retrofit - PC (High Lumen) 18W/2100 Lm
Ultra bright polycarbonate LED retrofit tube light with very high efficacy of ≥115lm/W, suitable for replacement of existing T8 & T12 fluorescent tube light with G13 lamp holder.
Ultra bright LED retrofit tube light with aluminium housing and polycarbonate diffuser with high efficacy, suitable for replacement of existing T8 & T12 fluorescent tube light with G13 lamp holder.
T8 Retrofit - Al (High Lumen) 18W/2100 Lm
Ultra bright LED retrofit tube light with aluminium housing and polycarbonate diffuser with very high efficacy of 120lm/W, suitable for replacement of existing T8 & T12 fluorescent tube light with G13 lamp holder.
T8 Retrofit ( High Wattage) 30W/4000 Lm
Ultra High Output, High performance, low energy consumption , Plastic all around design with Al heatsink for lifetime product reliability
Compatible with Direct mains
Available in 1200mm versions
T8 Retrofit - Glass 18W/1800 Lm 20W/2100 Lm
Ultrabright glass LED retrofit tube light suitable for replacement of existing T8 & T12 fluorescent tube light with G13 lamp holder.
T5 Retrofit - Al (with ext. driver) 18W/1800 Lm
Ultra bright LED retrofit tube light with aluminium housing and polycarbonate diffuser, suitable for replacement of existing T5 fluorescent tube light with G5 lamp holder.
LED Battens & Reflectors : providing immediate solutions
LED Batten 4ft PC Body Square
20W / 2000 Lumen / CCT : 6500K
PC Body + PC Diffuser
LED Batten 4ft PC Body Round
20W / 2000 Lumen / CCT : 6500K
PC Body + PC Diffuser
LED Batten 4ft Integrated Aluminum Body 36W - ATLAS
36W / 4000 Lm / CCT : 65OOK
Powder Coated Aluminum Extrusion Body + PC Diffuser
LED Batten 4ft Integrated with inbuilt reflector - LINEA
18/23/28 W , 100 Lumen per watt / CCT : 6500k
Aluminum Body + PC Diffuser + Integrated Reflector
LED Dual Batten 4ft Integrated with inbuilt reflector - DUAL LINEA
36/46/56 W / 100 Lumen per watt/ CCT : 6500k
Aluminum Body + PC Diffuser + Integrated Reflector
LED Batten 4ft Integrated : 40W
40W / 4000 Lm / CCT : 6500K
Sleek Aluminum Body + PC Diffuser with Mounting Clamps
Tubelight Batten Industrial - 2ft/4ft
Size : 2ft/4ft suitable for single /double tubelights
MS Body with base plate & holders
Tubelight Batten Reflector ( Powder Coated )
Size : 2ft / 4ft available
Material : MS Powder Coated
Tubelight Batten Reflector ( High Reflective Aluminum )
Size : 2ft / 4ft available
Material : Anodized Aluminum
Highbay Lighting : Ensuring uniform light levels
Green Perform Elite Highbay – FEATURED PRODUCT
•Available in 10000/15000/20000/25000/30000 Lm output
• Available Wattages : 68/102/135/169/203 Watts •CCT : 4000K or 6500K CRI ≥80 at SDCM <3
•Robust: IP65 / IK08 •Life Class of 50,000 hrs. @ Ta 45⁰ C
•Outstanding Energy Efficiency Incorporates extremely efficient, state of the art LED technology •System efficiency >145 lm/ W •75 % energy savings versus conventional HID static light • Designed for diverse environment from 30˚C to 50 ˚ C •Lack of Lens Glare makes it gentle and comfortable to eye •Polycarbonate front cover makes this luminaire suitable for F & B industry
HIghbay Light Linear
Wattages : 36/48/60/80
Aluminum Extruded body with Acrylic Cover
Aluminum Extrusion Body with Polycarbonate Diffuser
Bulk Head Light
Specs : 10W CCT : 4000/ 6000K , IP66
Pressure Die Cast Housing and IK09 impact resistance
LED Batten IP40 with Inbuilt Reflector - LINEA
Wattages : 36/48/60/80
Aluminum Extrusion Body with Polycarbonate Diffuser
Canopy Light
Specs : 80W , 8000 Lm , IP65 Recess Mounted Bottom opening High grade Aluminum housing with frame , pressure die cast heat sink
Weatherproof Proof Luminaire - 4ft with T8 Retrofit tubelight
Specs : Available with 1x18 / 2x18 W T8 Led Retrofit LED tubes
Polycarbonate housing with translucent polycarbone diffuser
Well Glass Luminaire - High Wattage
Specs : 60 / 70W , IP65
Aluminum die cast housing and bowl shaped polycarbonate diffuser
Well Glass Luminaire - Low Wattage
Specs : 25/30/36/40/455W , IP65
Aluminum die cast housing and bowl shaped polycarbonate diffuser
Office Lighting : providing a sustainable environment
Move from functional to inspiring work environment.
Create office spaces that promote networking
Office as an extension of brand & identity
Digital & green revolution
Uniform lighting , low glare & LPD
Downlight Recess Round Deep Aluminum Body
Specs : 10/15/20/22W , all CCT
Back lit LEDs in Aluminum Die cast housing with opal diffuser
Downlight Recess Round / Square Slim Aluminum Body
Specs : 6/12/15/18W , all CCT
Edge lit LEDs in Aluminum Die cast housing with opal diffuser
Downlight Surface Round / Square Slim Aluminum Body
Specs : 6/12/15/18W , all CCT
Edge lit LEDs in Aluminum Die cast housing with opal diffuser
Linear Light Recess - Dline
Specs : 28/36/56/72 W all CCT
PCB Mounted LEDs in Aluminum extruded body with highly translucent optics for glare control & uniformity
Linear Light Recess - Dline Techzone
Specs : 28/56 W all CCT
PCB Mounted LEDs in Aluminum extruded body with highly translucent optics for glare control & uniformity
Linear Light Suspended - Down
Specs : 14/28/56 W all CCT
PCB Mounted LEDs in Aluminum extruded body with highly translucent optics for glare control & uniformity
Panel Light Recess 1x1 Back Lit
Specs : 24W ,all CCT
Edge lit LEDs in Aluminum Die cast housing with opal diffuser
Panel Light Recess 2x2 Back Lit
Specs : 24/30/36/42W ,all CCT
Backlit LEDs in CRCA housing with full opal diffuser
Panel Light Recess 2x2 Edge Lit Ultra Slim
Specs : 36W ,all CCT
Edge lit LEDs in aluminum extruded housing with full opal diffuser
Panel Light Recess 4x1 Back Lit
Specs : 36W ,all CCT
Backlit LEDs in CRCA housing with full opal diffuser
Panel Light Surface 1x1 Back Lit
Specs : 24W ,all CCT
Backlit LEDs in CRCA housing with full opal diffuser
Panel Light Surface 4x1 Back Lit
Specs : 36W ,all CCT
Backlit LEDs in CRCA housing with full opal diffuser
PLL Lamp 4 Pin
Specs : 18-20W / 2000 Lumen / CC:865
Aluminum Extrusion Body with Polycarbonate Diffuser
Street Lighting : creating safer roads & reducing accidents
Street Light Standard High Wattage
Specs : 60/70/80/90/110/120/150/160/180/200/250W , IP66 , CCT:5700K
Aluminum pressure die cast housing , toughened glass and peanut lens for batwing light distribution
Street Light Standard Low Wattage
Specs : 20/30/40W , CC: 5700K , IP66
Aluminum pressure die cast housing , toughened glass and peanut lens for batwing light distribution
Flood Lighting : Lighting up larger areas
Flood Light Oval - higher wattage
Specs : 300/350/400/450/500W , IP66 , CCT:5700K
Aluminum pressure die cast housing , toughened glass and peanut lens for batwing light distribution
Suitable for fa?ade and general purpose area lighting
Flood Light Standard
Specs : 20/40/70/100/120/150/200/250/300/350/400W , IP66 , CCT:5700K
Aluminum pressure die cast housing , toughened glass and peanut lens for batwing light distribution
Flood Light Standard with Lens
Specs : 50/60/70/80/100/120/150/200/250W , IP66 , CCT:5700K
Aluminum pressure die cast housing , toughened glass and peanut lens for batwing light distribution
Landscape Lighting : beautifying places
Bollard
Specs : 10W , IP65 , CCT : 3000K.
Pressure Die Cast Aluminum Housing with a landscape luminaire on top for diffused lighting
Height : 3m to 12m
Single piece poles . hot dip galvanized with seven tank phosphating process , rust proof, for outdoor lighting with street lights.
Fibreglass ( FRP/GRP) poles
For structural support of highway signs , luminaires & traffic signals.
Available with Top/side/arm mounting .
Base type : Burial / anchor
Swadged Poles
Manufactured from ERW / welded tubes swaged and joined together. Special poles can be manufactured as per customer drawings .For designer & architectural type street & landscape lighting .
High Masts
For High Mast applications on crossings & open fields. Height : 12.5m TO 30m . Complete with Mast Head , Winches , Luminaire Carriage , Suspension System , Electrical System & Foundation Bolts
Stadium Masts
Manufactured in polygonal tapered section and assembled at site .Top platform and the mast designed for the desired no. of floodlight luminaires. Ideal for stadium lighting to international standards.
Signage Masts
Available in custom made heights .For advertising on highways and other strategic outlets.Mainly used by petroleum companies like IOCL / BPCL / HPCL.
Flag Masts
Avaiable in desired heights. For installation of Flags.Available with raising & lowering system.
Solar LED Outdoor Lighting - Solar Street Lights & Solar Mini Masts
Solar Street Light system - Standalone
Standard Street Light system with separate Panel mounting , separate batter box , available from 7W to 45 Watts suitable for 4/5/6m poles
Solar Street Light system - Semi Integrated
Wattages available : 7/15/20/24/30 W , Theft retardant integrated Battery Box , MPPT controller , Tubular Pole ( 4m/5m) with HDG Module mounting structure.
Solar Street Light system - Fully Integrated
All In One Solar LED Street Light, Panel:40Wp, Battery: 12.8V/21Ahr LiPO4 , MPPT charge controller , with PIR sensorr & suitable for mounting upto 4m, Aluminum Extruded Body with IP66 standards
Solar Mini Mast system - with Street Lights
Street Light Mini Mast system - 4x30W , with 500 Wp solar panel , 400 Ahr battery and MPPT controller , 9m octagonal Galvanised Pole with battery box at 4m from ground.
Solar Mini Mast system - with Flood Lights
Flood Light Mini Mast system - 3x33W, 3x45W, 4x33W with 400/500 Wp solar panel , 300/400 Ahr battery and MPPT controller , 9m octagonal Galvanised Pole with battery box at 4m from ground.
Need Help with energy saving Solutions? We are waiting from your call !